To make sure your EMBRA Sheerise™ insert fits like a second skin and stays perfectly in place, prep your twinnies with a little extra love:

Cleanse with Care for a Perfect Stick

Even if your skin looks clean, your body naturally sheds dead skin cells—especially around the center curve area (areola) where inserts typically sit. These particles can cling to the silicone and reduce stickiness over time.

This is totally normal and easily fixable.

To avoid it:

• Gently wash your twinnies with mild soap and water, paying special attention to the areola area.
• Dry completely—no dampness, oil, or product residue.
• Avoid touching the adhesive until the insert is fully applied.

Why it matters: EMBRA’s skin-friendly silicone may cling to skin debris if not properly cleaned. Don’t worry—it can be refreshed using Rinsee Gentle Liquid Soap by EMBRA, specially made to preserve the adhesive.

DO NOT apply before wearing:

• Moisturizers
• Oils or serums
• Powders, sprays, or deodorants
• Perfume

These act as a barrier and prevent the bra from sticking properly. Clean, dry skin = lasting hold and seamless shape.

From subtle lift to sleek silhouette.

1. Peel the Film

   Gently peel off the plastic film from the adhesive side. Handle only the non‑sticky edge to keep it clean

2. Choose Your Style

   • One-Sided Adhesive: Direct lift—adhere to skin only.
   • Two-Sided Adhesive: Ultra‑secure—adhere to skin and inside your bra/clothing simultaneously.

3. Place & Lift

   Lift your twinnie gently with one hand. Place KLODYA under the twinnie (padded side down), starting at the underside and gliding slightly upward toward the center.

4. Secure & Adjust

   While holding your twinnie, press the insert gently to bond with your skin (and clothing if using two‑sided). Adjust until both sides look balanced and natural.

5. Smooth the Edges

   Lightly tap along the edge to remove air bubbles and ensure a seamless, invisible finish.

Extend their life. Keep them flawless. Reuse with confidence.

Your KLODYA inserts are designed to be reused 20+ times with the right care. Gentle maintenance will help preserve the adhesive, shape, and comfort for weeks—even months.

After Every Wear, Follow These Steps:

1. Peel Off Gently

   Start from the outer edge and peel sideways toward the center. Avoid pulling too quickly to protect both your skin and the adhesive.

2. Wash with Care

   Use lukewarm water with a soft, foaming soap—or ideally, Rinsee Gentle Liquid Soap by EMBRA—to protect the SkinBond™ adhesive.
   • Lather gently with your fingertips.
   • Do not rub, scrub, or use nails, cloths, or brushes

3. Rinse Thoroughly

   Rinse until all soap is removed and the surface feels clean.

4. Air Dry Flat

   Lay the insert adhesive-side up on a clean, flat surface. Let it dry naturally at room temperature. Never use towels, tissues, hairdryers, or direct sunlight—these damage the adhesive.

5. Reapply the Protective Film

   Once fully dry, cover the adhesive with the original plastic film to protect it from dust and lint.

6. Store It Properly

   Slip your inserts back into the EMBRA Velvet Pouch or Zippy Silicone Travel Case if you’re on the move. Store in a cool, dry place away from direct sunlight or humidity.

Because at EMBRA… You don’t just wear confidence. You care for it.

We currently ship to the United Arab Emirates only.

Dubai/Sharjah/Ajman
2-3 Days

Free delivery for orders AED 350 and above.
AED 18 shipping fee for orders below AED 350.

Abu Dhabi/Ras Al Khaimah/Al Ain/Umm Al Quwain
3-4 Days

Free delivery for orders AED 350 and above.
AED 18 shipping fee for orders below AED 350.