To make sure your EMBRA Invisibra fits like a second skin and stays perfectly in place, you’ll need to prep your twinnies with a little extra love.

Cleanse with Care for a Perfect Stick

Even if your skin looks clean, your body naturally sheds dead skin cells—especially around the center curve area (commonly known as the areola) of your twinnies. These skin particles may transfer to the adhesive during wear, dulling its grip or causing light surface staining.

This is totally normal and easily fixable.

To avoid it:

• Gently wash your twinnies with mild soap and water, paying special attention to the center curve area (areola) where the cups will sit and clasp. Dry completely—no dampness or product residue.
• Avoid touching the adhesive until the bra is fully applied.

Why it matters: EMBRA’s skin-friendly silicone may cling to skin debris if not properly cleaned. Don’t worry—it can be refreshed using Rinsee Gentle Liquid Soap by EMBRA, specially made to preserve the adhesive.

DO NOT apply before wearing:

• Moisturizers
• Oils or serums
• Powders, sprays, or deodorants
• Perfume

These act as a barrier and prevent the bra from sticking properly. Clean, dry skin = lasting hold and seamless shape.

Ultra-thin dual cups with front clasp. Designed for a seamless, featherlight lift.

1. Unclasp the Cups Gently separate the two cups by unclipping the front buckle, preparing them for individual placement.
2. Peel the Protective Film Carefully peel off the plastic protective film from the adhesive side of each cup. Hold only the edges to keep the surface clean and sticky.
3. Place & Glide (Method 1) Starting with one cup, place it on the outer side of your twinnie, and glide it inward and slightly upward toward the center. Repeat on the other side. This gives you a natural contour and lifted shape.
4. Alternative Placement (Method 2) Or, for a balanced full-cup effect, place both cups simultaneously on the outer sides of your twinnies, gliding them from the side toward the center in an upward motion. Once in position, buckle them together to shape and support evenly.
5. Clasp to Lock Gently bring your twinnies together and secure the front clasp. This locks in the lift and creates natural-looking cleavage.
6. Tap & Smooth Use your fingertips to lightly tap and smooth the edges, blending them seamlessly into your skin. NAYA’s ultra-thin 0.5mm edge disappears under clothing, even in close-up photos

Extend its life. Keep it flawless. Reuse with confidence.p>

Your EMBRA Invisibra — whether NAYA, FEYA, or LAYRA — is made to last through 20+ wears (or more!) with the right care. Gentle maintenance will help preserve the adhesive, shape, and comfort of your bra for weeks, even months.

After Every Wear, Follow These Steps:

1. Peel Off Gently

   Start by slowly and gently removing each cup sideways, beginning from the outer wing or side of the cup, peeling inward toward the center. Avoid pulling too quickly or in a downward motion, as this can strain both your skin and the adhesive. Use a soft, steady motion for a clean, damage-free removal.

2. Wash with Care

   Use lukewarm water and a soft, foaming soap — or ideally, Rinsee Gentle Liquid Soap by EMBRA, specially formulated to protect our skin-safe adhesive.
   • Lather gently using only your fingertips
   • Do not rub, scrub, or use nails, cloths, or brushes
   • Avoid applying direct pressure to the adhesive

   💡 Pro Tip: Even if your bra looks clean, your skin naturally sheds oils and particles.

   Always clean your Invisibra after 1–2 wears to maintain maximum stickiness and hygiene.

3. Rinse Thoroughly

   Rinse under lukewarm water until all soap is removed. The surface should feel clean and residue-free.

4. Air Dry Flat

   Lay the bra adhesive-side up on a clean, flat surface. Let it air dry completely at room temperature.

   Never use:

   • Towels or tissues
   • Hairdryers or blowers
   • Direct sunlight or heat
   These will damage the adhesive.

5. Reapply the Protective Film

   Once fully dry, reapply the original plastic film to protect the adhesive from dust, lint, or particles.

6. Store It Properly

   Slip your Invisibra back into the EMBRA Velvet Pouch, or use the Zippy Silicone Travel Case if you're on the move. Store in a cool, dry place, away from direct sunlight or humidity.

When You Care, It Stays With You

With the right routine, your EMBRA Invisibra will support your twinnies for dozens of wears—invisibly, comfortably, and confidently. Because at EMBRA… You don’t just wear confidence. You care for it.

We currently ship to the United Arab Emirates only.

Dubai/Sharjah/Ajman
2-3 Days

Free delivery for orders AED 350 and above.
AED 18 shipping fee for orders below AED 350.

Abu Dhabi/Ras Al Khaimah/Al Ain/Umm Al Quwain
3-4 Days

Free delivery for orders AED 350 and above.
AED 18 shipping fee for orders below AED 350.